High Quality Popping Boba Bubble Tea Making Machine

• Customization: Available
• After-sales Service: Online Support
• Warranty: 1year
• Model NO.: XD-08
• Certification: CE
• Power Source: Electric
• Automatic Grade: Automatic
• Customized: Non-Customized
• Product Diameter: 3-20mm
• Weight: 8.1kg
• Size: 550*380*250mm
• Voltage: 220V50Hz
• Material: Stainless Steel
• Transport Package: Wooden Case
• Specification: Single head, four heads, eight heads
• Origin: China
• Package Size: 70.00cm * 50.00cm * 45.00cm
• Package Gross Weight: 9.000kg

Product Description

Product Description

 

 

Cycle time controller setting: The first two digits control the production speed. The red letter represents the last two digits of the time unit to control the product diameter size. The first two digits can be adjusted from 1 to 9. The smaller the number, the higher the production efficiency, while the larger the number, the slower the production speed. The last two digits are adjustable, ranging from 1 to 4. The smaller the number, the larger the product diameter. The larger the number, the larger the product diameter. Pay attention to the red letters. 0.1S represents 0.1 seconds. You must select the time unit of 0.1S. Adjusting other letters SHM may cause the battery motor to burn out due to incorrect operation settings. The time unit must be selected as 0.1S.

 

Coagulation solution configuration: 1 kilogram of clean water+6 grams of anhydrous calcium chloride, gently stir to melt the backup raw material slurry configuration: 500 grams of pure water+5 grams of alginate. Stir evenly with a high-speed mixer, and then settle for several hours until the liquid is clear without foam and bubbles. Then add 50 milliliters of mint syrup "or rose syrup or freshly squeezed fruit juice"+30 fructose and gently stir by hand. Place the solidified liquid at the bottom of the machine and pour the slurry into the machine hopper. Activate the green button switch. If the dripping product is particularly large, it is necessary to adjust the separation between the motor hook and the feed hopper handle. Use iron pliers to adjust the handle of the hopper, adjust the product diameter downwards to reduce it, and adjust it upwards to increase the product diameter. If the product is not formed and has a tail, you can also use iron pliers to adjust the feeding hopper up and down and press' bing '

 

 

Detailed Photos

 

 

 

Packaging & Shipping

Our Advantages

 

Company Profile

 

Successful project